The Story
- Low power operation of 0.7mA
- Operates from a single positive power supply of 3 to 32V
- Can also operate from a split supply of ± 1.5 to ±16V like typical Op-Amp
- 700kHz unity gain bandwidth
- The open loop gain of 100x
Description:
The LM358 is a very common low-power, dual-channel op-amp. They are widely used as pre-amplifiers in many audio devices. They have a wide frequency range and fast response time and run over a 3 to 32 volt supply range. The LM358 is a low-power dual Op-Amp with two independent high-gain and frequency compensated operational amplifiers. It is designed to operate from a single power supply over a wide range of voltages from 3 to 32V. This makes it a popular general-purpose Op-Amp that is used in many projects since the negative power supply is not required as with most Op-Amps. This gives it a place in every hobbyist's parts bin.
Features:
- Low power operation of 0.7mA
- Operates from a single positive power supply of 3 to 32V
- Can also operate from a split supply of ± 1.5 to ±16V like typical Op-Amp
- 700kHz unity-gain bandwidth
- The open-loop gain of 100x
Pin Description:
- Pin-1 and pin-8 are o/p of the comparator
- Pin-2 and pin-6 are inverting i/ps
- Pin-3 and pin-5 are non-inverting i/ps
- Pin-4 is the GND terminal
- Pin-8 is VCC+
- Besides single-supply operation, they can also be operated from dual power supplies ranging from ± 1.5V to ± 16V if needed for a particular application.
- Outputs have good drive capability and can source up to 30mA per channel and sink 20mA.
- These Op-Amps are frequently used to buffer or amplify signals. They can be utilized in a wide range of circuits such as voltage comparators, active filters and voltage-controlled oscillators (VCOs).
- They have a gain of up to 100x and can handle frequencies of up to 700KHz.
Package Included:
1 x LM358 Operational Amplifier IC for basic projects
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
- Low power operation of 0.7mA
- Operates from a single positive power supply of 3 to 32V
- Can also operate from a split supply of ± 1.5 to ±16V like typical Op-Amp
- 700kHz unity gain bandwidth
- The open loop gain of 100x
Description:
The LM358 is a very common low-power, dual-channel op-amp. They are widely used as pre-amplifiers in many audio devices. They have a wide frequency range and fast response time and run over a 3 to 32 volt supply range. The LM358 is a low-power dual Op-Amp with two independent high-gain and frequency compensated operational amplifiers. It is designed to operate from a single power supply over a wide range of voltages from 3 to 32V. This makes it a popular general-purpose Op-Amp that is used in many projects since the negative power supply is not required as with most Op-Amps. This gives it a place in every hobbyist's parts bin.
Features:
- Low power operation of 0.7mA
- Operates from a single positive power supply of 3 to 32V
- Can also operate from a split supply of ± 1.5 to ±16V like typical Op-Amp
- 700kHz unity-gain bandwidth
- The open-loop gain of 100x
Pin Description:
- Pin-1 and pin-8 are o/p of the comparator
- Pin-2 and pin-6 are inverting i/ps
- Pin-3 and pin-5 are non-inverting i/ps
- Pin-4 is the GND terminal
- Pin-8 is VCC+
- Besides single-supply operation, they can also be operated from dual power supplies ranging from ± 1.5V to ± 16V if needed for a particular application.
- Outputs have good drive capability and can source up to 30mA per channel and sink 20mA.
- These Op-Amps are frequently used to buffer or amplify signals. They can be utilized in a wide range of circuits such as voltage comparators, active filters and voltage-controlled oscillators (VCOs).
- They have a gain of up to 100x and can handle frequencies of up to 700KHz.
Package Included:
1 x LM358 Operational Amplifier IC for basic projects
